Products
Home Sous Vide Controller

 

Your Sous Vide At Home Controller will turn a rice cooker or slow cooker into a Sous Vide bath allowing you to cook:
  • the perfect steak every time
  • tender juicy chicken breast that is not dry
  • the best turkey you have ever cooked
  • salmon that is moist and full of flavour
  • vegetables that retain all of their fresh flavour even when cooked

 

Now you too can do this at home!!!!


How to use the Sous Vide At Home temperature controller


  • Place the Sous Vide At Home temperature controller next to a rice cooker or slow cooker filled with water
  • Place the sensor of the Sous Vide At Home temperature controller into the water on the bottom of the cooker
  • Plug the cooker into the back of the Sous Vide At Home temperature controller and turn on the cooker
  • Plug the Sous Vide At Home temperature controller into the mains/line power
  • Turn on the Sous Vide At Home temperature controller
  • Set the desired cooking temperature
  •  The temperature will be maintained within 0.1C of the set value

 

Benefits of the Sous Vide At Home temperature controller

 

 

  • Simple to use
  • Adjustable to 0.1 degree
  • Maintains temperature to within 0.1 degree
  • Runs on  both 110 Volts and 220 Volts (NOTE: NON Aust/NZ buyers please see information below)
  • Can control a large range of rice cookers and slow cookers and other heating elements
  • Able to heat cold water to desired temperature
  • Value for money solution without needing additional equipment
  • Small size takes up minimal space on cooking area
  • Easy to pack out of the way when not used
    		•



    Most suitable appliances for a water bath

      cooker-and-controller1

    The recommended water bath units for the Sous Vide At Home controller are large rice cookers in the range of 15 to 30 cups of dry rice with limited insulation around the sides.

    Critically the rice cooker or slow cooker must be the ON/OFF type of cooker with no other electronic switching in place.These are by far teh most common. The Sous Vide At Home temperature controller will not be able to control electronic rice cookers or slow cookers.

    A good indicator that the cooker will not work is the nature of the display. If there is an LCD display or the 'ON' switch is not a large mechanical unit but rather a small touch membrane switch, the controller will not be able to control it.

    Slow cookers are also suitable for this unit however their heating elemens are not as powerful as rice cookers, they tend to heat up more slowly. Slow cookers also suffer due to the reduced convection in the water bath owing to the heating elements being placed around the sides of the pot and not the bottom.If using a slow cooker it is advisable to place warm water in the slow cooker at the start to save time in heating the water from cold. It is also important to keep the lid on a slow cooker to ensure maximum heating efficiency.

      

    Construction

    frontleftweb
    • The all new Sous Vide At Home temperature controller is manufactured to a very high standard.
    • The heart of the unit is a state of the art PID controller with an auto tune function that adapts itself to the vessel being controlled. The controller is adaptive, and can change its programming to suit the situation.
    • The power is controlled through a solid state relay that has a lifetime of millions of cyles, ensuring years of hassle free service
    • The unit also contains a 10A fuse to ensure the safety of the users.


    sensor

    • The sensor is made with a stainless sheath and sealed in a waterproof case to ensure it will work in the sous vide environment
    • The cable is embeded in a plastic case that is in turn protected by a soft woven stainless steel protective cover.
    • The cable is detachable from the unit to allow for efficient packing when not in use

      International Buyers

       overseas

      • The Sous Vide At Home temperature controller works almost anywhere in the world. It runs on  220 and 110 Volts.
      • There are two power plugs on the unit.
      • The power into the unit is supplied through a standard IEC power cord. This is the cord that comes will all computers. If you are an international buyer (ie non Aust/NZ) we will not send the cord to you. You will need to go to your local computer store and buy a standard computer cable. They are very cheap, in Australia they cost AU$5.
      • The power coming out of the unit and going to the water bath comes out via a standard Australian power plug. We have two adaptors available for our clients.
      If your particular country does not appear on the description above then the adaptor we supply with the Sous Vide At Home temperature controller will not work in your country.

      In this instance if you wish to use the Sous Vide At Home temperature controller you will need to source a suitable adaptor.